We have teamed up with some of the market leaders in the UK
to supply the FULL range of lubricant & fuel products.
- Nozzles & Hoses
- Hand Pumps
- Lubrication/Dispensing Equipment
- Drum Equipment
- Flow Meters
- Electric Pumps
- Fuel Tank Equipment
- Heating Oil Equipment
- Signs & Labels
- Absorbents & Tools
- Forecourt Construction Equipment
all at very competitive prices and immediate delivery local or nationwide.
A small selection of our products are listed below but if you have any enquiries please do not hesitate to contact us for an immediate quotation.
Robust nutating disc flow meter showing up to 999 litres
- Suitable for use with most fuels, light oils & other liquids
- 19 – 75L/min. 1” BSPF ports. 10:1 Pulser available
- Accuracy of +/- 2% with adjustable calibration
- Aluminium housing & cover
- 6 digit non-resettable totaliser
- Front face can be rotated in 45-degree increments
- Max. pressure 50 psi (3.5 bar)
- Integral inlet strainer
Samoa & Mcnaught grease guns
- available from stock
- Universal pumps to be used with 400-gram grease cartridges or with bulk grease.
- Maximum working pressure 300 bar.
- available from stock.
- Air operated Pumpmaster range for high pressure greasing or manual operated pumps
50 or 70 l/min pump
- Mounted on a bracket for wall or tank mounting.
- The unit includes a 220 V diesel pump with on/off switch and 1.8 m cable, wall bracket, 4 m delivery hose, aluminium nozzle and a three-digit meter, flange mounted to the pump. Fluid inlet connection: 1” BSP (F). Meter valid for non-commercial applications only.
ZVA nozzle for use on aviation fuel dispensers
- Suitable for use with Avgas, Avtur, Methmix & De-icer
- 1” BSPF swivel inlet
- Fitted with a spout c/w drip cap chain/spring & No 4 guard
- 100 mesh stainless steel screen fitted in spout
- Max. pressure 72 psi (5 bar)
Diesel delivery hose
- Low cost
- 19mm, 25mm or 38mm bore
- Supplied by the metre or in made up hose assemblies
- Assemblies have brass hose tails threaded BSPM taper
- Ends held in place with stainless steel machine bands
- Nylon reinforcing. Not electrically bonded
- Max operating pressure on 25mm = 50 psi (3 bar)
Forecourt Equipment : UPP Pipework, UPP Fittings
- Sockets, Elbows, Tees, Reducers, End Caps, Flanges, Gaskets, Termination, Accessories
- Tank Chambers & Under Pump Sumps, Entry Boots
- Manway Covers, Pump – Vent & Fill Mounting Frames, Spill Manway & Inspection Well
- Shut Off/Check Valves, Shear & Under Pump Valves
- Flexible Connectors & Sump Hoses, Flange Kits, Under Pump Flex Connectors & Spares, Suction Deflectors & Bushes
- Overfill Prevention Valves, Overfill Cage & Fill Nipple, Vapour Recovery Components
- Fill Point Couplings & Caps, Fill Point Adaptors & Caps, Galvanised Pipe & fittings